1Port USB 3.0 over Fiber Optic Extender, also named as USB3.0 to fiber converter or USB3.0 fiber
transmitter and receiver, which through the two-core or a core
fiber to stably transmit a 5Gbps USB3.0 high-speed signal to 250
meters. USB3.0 fiber extender use a dedicated USB3.0 PHY to meet
the USB3.0 protocol requirements.. This equipment consists of the
host side (receiver R) and the device side (transmitter T) . The
host side is powered by a USB3.0 Type A connector or an external
power supply. The device side is powered by an external power
supply and then provides power to other USB3.0 devices via the
USB3.0 Type A connector. It can be widely used in video
conferencing, multimedia information release, government
departments, medical systems, commercial display, multimedia
function hall, security monitoring, public utilities and other
1, Max extension distance 250m (SM or MM fiber cable).
2, Duplex/Single LC fiber connecter, pure hardware design, no
driver needed, compatible with all operation systems, support plug
3, Support USB3.0 SuperSpeed up to 5Gbps, USB 3.0 Type A Receptacle
4, Not compatible with USB 2.0 and USB 1.1
|Physical||Size (L× W ×H)||104mm x104mm x28mm|
|sender power consumption||<5W|
|receiver power consumption||<5W|
Equipment powered sequence:
(1) Receiver(host-side)connect to USB3.0 port
(2) Transmitter(client-side)powered with the DC 5V adapter
(3)Connect other USB3.0 device to the transmitter(client-side)
After fiber is connected, the fiber indicator is on, otherwise off.
After other USB device is inserted, the USB indicator will be on,
otherwise off. If the host PC does not recognize the device,operate
1 press the the REST key on the transmitter(client-side)for 5
seconds, restart the device.
2 Connect the Receiver to another USB3.0 interface PC/Mac.
3 uninstall the "USB3.0 hub" in the device manager, re-connect.
When the device is working, do not plug USB3.0 and fiber cable to
avoid the equipment does not work properly.